This product is a high-performance UV ink, has good protection
apply to the surface coating of plastic products low luster
can be used with matte UV surface any proportion.It has good
, abrasion resistance, high transparency, good weatherability,
chemical resistance, wide applicability, etc.
Electronic plastic products such as mobile phone keys,mobilephone shell;
- 1.Clear the impurities on the material;
- 2.Ink stir well before use, with XSJ - 2606 by 1:0. 8-1 ratio mixed
stirring after all, with 300 mesh cloth filter operation, manual or
Spraying viscosity (Iwata2# cup, 25 C)
UVcondition of vulcanization
and UV energy
condition of vulcanization60±5℃/5-7min ,
Film thickness standard, μm
Airtight store in a cool, dry and ventilated place (storage
temperature of -5℃to 35℃, humidity is≤85%), leak proof, waterproof, sunscreen, anti high temperature,
away from the fire source.
Shelf life:6 months
Matters needing attention
1. The product should fully stir well after opening.
2. The coating must keep good for the environment, that suggests to
use clean processing preparation, temperature control at 20 ~ 30 ℃,
humidity control in the 60 ~ 80%.Too much dust will cause poor
increased, temperature too low to cause a decline in poor flow
leveling and adhesion, humidity coating caused by shrinkage, low
humidity of the electrostatic potential safety hazard.
3. The coating appearance and coating film thickness, suggested
coating film thickness to18±2μm.
1. The product must be used in well ventilated condition, avoid
inhaling many human body in the construction process, and avoid
skin contact, forbidden to eat.
2. Be careful to use this product, and when using please pay
attention to safety matters before use.In addition, still should
follow the relevant national or local safety regulations stipulated
by the government.(detailed safety guidelines refer to the
|Name:||Dongguan Meiya Chemical Co., Ltd|
|Add:||Room 205,2/F,Lianfeng Edifice,Dongcheng Mid road Dongcheng
District,Dongugan City,Guangdong Province,China.|