PMR-90 EZ is a rapid curing semipermanentmold release agent that provides multiplereleases with minimal transfer to the molded part.®PMR-90 EZ is the highest slip version ofPMR family; primarily for closedmolding of abrasive or low draft parts.
- HAPs Free*
- High thermal stability
- Easy to apply
- Multiple releases between applications.
- Reduces labor time and cost
* HAPs are not formula constituents of this product. Standardmanufacturing processes may result in trace quantities.
[<0 .1%] of HAPs.
®solvent carriers contain no Class I or IIregistered ozone depleting substances.
1. Clean mold surface to remove all traces of waxes,release agents and sealers.Chemlease®Mold Cleaner.
3. Apply the appropriate Chemlease®Sealer to newor porous molds (contact a Sales Rep orDistributor for details).
Application For Base Coatings
1. Mold surface must be thoroughly cleaned toremove all traces of wax, release agents, and othersealers.
2. Surface should be dry and free of contaminants.
3. Saturate clean cotton cloth (not dripping) and wipeon a smooth continuous film. Apply no more thana few square feet at a time.
4. When the film begins to evaporate at the edge,wipe the surface with a second clean dry cottoncloth. Use a circular motion from the outside,working inwards until film is left dry and clear. SeeNotes.
5. Repeat above procedures until entire mold surfacehas been covered.
6. Apply 4-5 coats, allowing 15 minutes between eachcomplete coat.
7. Allow 30 minutes for full cure. Proceed withproduction.Touch-Up CoatsReapply one light coat as required and cure as for finalcoat.NotesTime will vary with room and mold temperature. Wipe off asthe solvent begins to evaporate. If the release agent is lefton too long, you may notice some smearing or streaking. Toremove the smear or streak, rub the affected area with therecommended Chemlease®release agent, and then simplyremove the excess sooner than you had before.
Our office and our team
How to contact us?
|Name:||Dongguan Meiya Chemical Co., Ltd|
|Add:||Room 205,2/F,Lianfeng Edifice,Dongcheng Mid road Dongcheng
District,Dongugan City,Guangdong Province,China.|